![]() |
| |
New standards for electrical cords Electrical supply cords must be: (a) either 30 metre length and standard as set out in the earlier AS 3001; or (b) must meet the requirements of the later AS/NZS 3001:2001.
This Standard permits supply leads to any be of four different maximum
lengths depending on cable size. These are set out in Table 5.1 of AS/NZS
3001:2001. These sizes are:
Note that supply leads must now be of one continuous length. It is not permitted to join two or more leads end-to-end. |
||||||||||||||||||
| Copyright
2002-2008 - Chrissy Eustace - www.around-oz.com websites
All Rights Reserved |
|||||||||||||||||||